7BD – 7lt Bee Keeping – Cappings Reducer – Honey Recovery – De Candy – Wax Cleaning

$455.00

or 4 payments of $113.75 with

Model: 7BD

SKU: 7BD Category:

Description

Model: 7BD – 7 lt Digital Temperature Controlled Electric Double Boiler

Digital Temperature Controllers provide excellent temperature control, fast reaction and intelligent operation allows the water jacket to be managed at as high as 100℃ and will cycle the heating element automatically to maintain temperature, simply set the desired water jacket temperature up to 100℃ and the controller will manage the temperature.

For more information watch our videos in the video tab, they explain why the double boiler method is so important and still the fastest way to do it correctly, share this with your friends like us on Facebook and help us help people to be successful by making an ethical and quality product.

Capping’s Reducer – Wax Cleaning – Capping’s Honey Recovery – 10kg Honey Warming – Bee’s Wax Candles & more

Recommended for 1-5 Bee Hives

Stainless Steel Product Taps.

Recommended for product temperature up to 85℃ – For higher than 85℃ product temperature please contact us for recommendations and advice, to achieve higher temperature digital models used with a thermal jacket can obtain temperatures up to and slightly over 90℃ understanding the water jacket is limited to the boiling temperature of water and some heat loss does occur in the transfer process.

Dual outlet electric double boilers are perfect for melting down Beeswax Capping’s, recovering honey, cleaning wax and liquefying candied honey a breeze!

Ideal for hobby or small business.

There’s nothing better than an electric double boiler.

Specifications

  • 7 lt internal product chamber.
  • 8 lt water jacket.
  • Overall dimensions: H42cm x W30cm.
  • Product chamber dimensions: H20cm x W22cm
  • Product tap heights 22cm & 26cm from the base.
  • Bottom Internal tap sits approximately 1 cm from the chamber base.
  • Top & middle taps are the product taps to the chamber, bottom lowest tap on right is to empty the water jacket.
  • Water jacket thermostat temperature range – 20-100℃
  • Cold start product to 85℃ – approximately 60 minutes.
  • Unit Power 240v/2300w – AS/NZS31122011 240V 10amp complies with Australian and New Zealand Electrical Standards.
  • Product chamber stainless Steel bridging pipes pass through the water jacket, product taps are brass, spouts are stainless steel.
  • Water jacket drain tap to empty water jacket if required – (position is the lowest tap on the right looking from the front of the unit )

We highly recommend purchasing a thermal jacket with all units, see thermal jacket listing for more details.

Features

  • The fastest heat up times for volume available on the market.
  • Production time savings.
  • Improved product quality & consistency.
  • Safe and easy to use.
  • Heat Control.
  • Detailed user instructions.
  • Easy to maintain.
  • For use on a domestic 10 amp power point with safety switch.
  • Serviceable.

The Basics

  1. First fill the water jacket with demineralised water – demineralised water is a low cost product that can be purchased at supermarkets and hardware stores for around $4 for 5 litres, once filled the demineralised water is left in the unit for it’s entire life just topped up as required, demineralised water protects internal components extending unit life and improving serviceability for many years.
  2. Plug into power.
  3. Heat unit to desired temperature.
  4. Add product and heat product to required temperature.
  5. Allow the product to separate/settle and stabilised at the required temperature.
  6. Drain off Products.

units will have some marks from the manufacturing processes.

Reducing / Cleaning Straight Capping’s

Reducing and cleaning straight capping’s is essentially the same process as the cleaning wax guide below with one difference, clean water should not be added to the chamber as wax capping’s have enough honey to melt and separate between the bottom layer of honey and the top layer of clean beeswax.

The honey recovered from the capping’s is therefore just heated honey and not honey rich water and it has many uses, it is commonly used for sauces, cooking and making mead (fermentation).

Note: For pressed wax capping’s, please use the guide below.

Cleaning Wax – Dirty wax capping’s, old foundation and wax from previous cleans.

Add water first to the chamber, fill to just above the top tap outlet.

Add wax capping’s, old foundation and wax from previous cleans to the chamber.

Set thermostat temperature to between 65-75℃ for the water jacket. Do not exceed 80c as at these higher temperatures the wax will discolour.

To achieve best results, a slower melt time is preferred. Ideally run the unit at a lower temperature (65-70℃ for usually 8-10 hours for best results), this will allow the wax to just melt and gravity to separate the liquid layers at different densities. Water/Honey is heavier than wax, therefore wax will float to the top of the chamber. Any debris will tend to sit within the water or just below the wax line (between water and wax). Therefore DO NOT stir the contents after it has melted and separated.

Once everything has melted, separated and settled (Usually 8-10 hours for best results), before opening the taps, if there is any debris floating on top of the wax, carefully skim the debris off – taking care not to stir the contents of the chamber. Open the lowest chamber tap to drain off the honey rich water until you see the colour/viscosity change and wax starts to come out, close the bottom tap, the wax line should now be below the top chamber taps. Allow the contents that has just been drained too cool, any wax will solidify on top, this wax can be recovered and added to the next batch to be processed.

Note: Honey rich water is ideally used to make Mead!

Now move up to the top chamber tap, depending on the temperature that you have the unit set to, you may need to apply an electric hot air gun or hair drier to the outlet, this will allow any solid beeswax to melt within the tap. Use a small container to check if clean wax is coming out, if wax is still dirty allow to settle longer or drop the level further with bottom chamber tap.

Once wax is clean drain clean wax straight into a pouring jug or moulds until the clean wax is exhausted.

Repeat the process until all capping’s and old foundation have been used.

If there is a build-up of pollen or debris in the bottom of the chamber it is time to clean the unit out.

It is not recommended to clean brood comb in the unit as brood comb generally contains a lot of debris – specifically cacoons which can clog the tap.

De Candy Warming Honey

It is important to set the desired temperature and allow the unit to heat up to the set temperature you require before placing honey in the chamber and warming the honey. For larger models (25-35L) 10L and 20L buckets of candied honey can be gently lowered into the unit. Set the temperature to 60℃ and run for 24 hours. After which the honey will be completely liquefied within the bucket. Lower temperatures will take longer. Note: honey heated above 40c is not considered to be raw.

Design Capability

Water boils at 100℃, however it is not possible to achieve 100℃ product temperature with double boilers, the main reasons for this are ambient (room) temperature fighting to cool the unit body and heat loss from transference through the wall of the internal product chamber, for these reasons we recommend the units for products up to 90℃, it may be possible to achieve up to 95℃ if the unit body is insulated, the work area is not below 20℃ and extra heating time is added.

Double Boiling Method Explained

An electric double boiler means the unit has a water jacket around the outside of the product chamber providing a much larger heating surface, the water jacket protects the product from high heat that is produced by the electric element when it’s heating, the water jacket thermostat controls the heating process, once heated up product is placed into the product chamber and the heated water in the jacket melts/heats/emulsifies/separates depending on the product being used from the base and the sides to the desired temperature.

The product tap passes through the water jacket and is surrounded by hot water heating it.

Product is stirred periodically to stabilise temperature before pouring.

Product temperature is maintained by the water jacket thermostat allowing the user to spend time preparing for the final product.

If you would like more information or have any questions feel free to email or call Rob directly on Ph: 0409 165 003.

Shipping Quotes and Checkout 

Note: Electric Double Boilers are large items and packaging is heavy duty and costly, $15 average has been added to the shipping cost to cover the packaging cost, units range from 24 – 54 cubic kilograms packaged for shipping, physical weight is up to 18kgs.

Shipping Quote:

  1. Add the item to the Basket to obtain a shipping quote, in the Basket enter your state & postcode in the shipping calculator, click update, the shipping cost will calculate to your postcode.

Checkout:

  1. Proceed to the checkout and provide full shipping details and select payment option.

Empty Cart:

  1. If you don’t wish to proceed, simply delete the item in the basket by clicking on the X next to the item.

Terms and conditions acceptance on checkout relate to usage, warranty etc, see about us tab for full details.

Shipping , availability and dispatch:  

AU Wax Melters is a direct to public manufacturer meaning units final built fitout is to order, please note “In Stock” means you are purchasing a place in the production line to have a unit built for you, In normal times orders are dispatched within 3 business day’s plus transit time depending on how far away you are from our location (Pakenham Victoria 3810), however In high demand periods order to dispatch can blow out to 7 days, please take this into consideration when timing your purchase.

Orders are shipped signature on delivery with Australia Post.  img_logo_small_austpost

 

 

You may also like…