25BDI – 25kg – Cappings Reducer – Honey Recovery – De Candy – Wax Cleaning

$759.00

or 4 payments of $189.75 with

Model: 25BDI

Description

Model: 25BDI – 25 kg Digital Temperature Controlled Electric Double Boiler

Capping’s Reducer – Wax Cleaning – Capping’s Honey Recovery – 20kg Pail De Candy – Bee’s Wax Candles & more

Recommended for 25 – plus Bee Hives

Watch our videos in the video tab, the video’s explain the double boiler method in detail, why it’s so important and is still the fastest and safest way to make quality products.

AU Wax Melters Electric Double Boilers are the single best investment a hobby, cottage or small business can make, there is no better Digitally controlled Electric Double Boilers currently available in Australia, our electric double boilers are easy to maintain and use, allow the user to do in a few hours what previously may have taken a day/days using other methods with confidence, temperature control, time Saving, improved product quality, they’re Australian Made and we are here to help and support you should you have any questions or need advice.

Most AU Wax Melters models are capable of achieving up to and some just over 90℃ in the product we recommended product temperature of 85℃ as this in most setups is easily achieved, the larger 25 & 35lt units benefit from the high performance element upgrade (3000 Watt 15amp element, see element upgrade listing)  water boils at 100℃

Double boilers are limited to the boiling temperature of water (100℃) and are subject to some heat loss that occurs in the transfer of heat from the water through the metal chamber wall to the product, ambient (room) temperature does play a part also, to reduce these effects units are fitted with thermal body insulator wraps offering greater temperature stability, significantly reducing power consumption, ensuring optimum performance and making them safe to touch.

If you would like more information or have any questions feel free to email or call Rob directly on Tel: 0409 165 003 (Telephone during business hours please)

Features

  • The fastest heat up times per volume available on the market.
  • Digital Thermostat Controller provides excellent temperature control.
  • Silver Thermal body insulator wrap – The insulator wrap significantly improves heat retention, significantly reduces power consumption and is safe to touch.
  • Production time savings.
  • Improved product quality & consistency.
  • Safe and easy to use.
  • Detailed user instructions.
  • Easy to maintain.
  • For use on a domestic 10 amp power point with safety switch.
  • Serviceable.

Specifications

  • 25 kg internal product chamber.
  • 18 litre water jacket.
  • Overall dimensions: H50cm x W40cm.
  • Internal product chamber dimensions: H30cm x W33cm
  • Product tap heights 18cm & 23cm measured up from the unit’s base.
  • Bottom Internal tap sits approximately 1 cm from the chamber base on the inside of the product chamber.
  • Top & middle taps are the product taps to the chamber, bottom lowest tap on right is to empty the water jacket.
  • Water jacket thermostat temperature range – 20-100℃
  • Cold start product to 85℃ – approximately 90 minutes.
  • Water jacket drain tap to empty water jacket if required – (position is the lowest tap on the right looking from the front of the unit )
  • Unit Power 240v/2300w – AS/NZS31122011 240V 10amp complies with Australian and New Zealand Electrical Standards.
  • Units will have some unavoidable marks from the manufacturing processes.

The Basics

  1. First fill the water jacket with demineralised water – demineralised water is a low cost product that can be purchased at supermarkets and hardware stores for around $4 for 5 litres, once filled the demineralised water is left in the unit for it’s entire life just topped up as required, demineralised water protects internal components extending unit life and improving serviceability for many years.
  2. Plug into power.
  3. Heat unit to desired temperature.
  4. Add product and heat product to required temperature.
  5. Allow the product to separate/settle and stabilised at the required temperature.
  6. Drain off Products.

Reducing / Cleaning Straight Capping’s

Reducing and cleaning straight capping’s is essentially the same process as the cleaning wax guide below with one difference, clean water should not be added to the chamber as wax capping’s have enough honey to melt and separate between the bottom layer of honey and the top layer of clean beeswax.

The honey recovered from the capping’s is therefore just heated honey and not honey rich water and it has many uses, it is commonly used for sauces, cooking and making mead (fermentation).

Note: For pressed wax capping’s, please use the guide below.

Cleaning Wax – Dirty wax capping’s, old foundation and wax from previous cleans.

Add water first to the chamber, fill to just above the top tap outlet.

Add wax capping’s, old foundation and wax from previous cleans to the chamber.

Set thermostat temperature to between 65-75℃ for the water jacket. Do not exceed 80c as at these higher temperatures the wax will discolour.

To achieve best results, a slower melt time is preferred. Ideally run the unit at a lower temperature (65-70℃ for usually 8-10 hours for best results), this will allow the wax to just melt and gravity to separate the liquid layers at different densities. Water/Honey is heavier than wax, therefore wax will float to the top of the chamber. Any debris will tend to sit within the water or just below the wax line (between water and wax). Therefore DO NOT stir the contents after it has melted and separated.

Once everything has melted, separated and settled (Usually 8-10 hours for best results), before opening the taps, if there is any debris floating on top of the wax, carefully skim the debris off – taking care not to stir the contents of the chamber. Open the lowest chamber tap to drain off the honey rich water until you see the colour/viscosity change and wax starts to come out, close the bottom tap, the wax line should now be below the top chamber taps. Allow the contents that has just been drained too cool, any wax will solidify on top, this wax can be recovered and added to the next batch to be processed.

Note: Honey rich water is ideally used to make Mead!

Now move up to the top chamber tap, depending on the temperature that you have the unit set to, you may need to apply an electric hot air gun or hair drier to the outlet, this will allow any solid beeswax to melt within the tap. Use a small container to check if clean wax is coming out, if wax is still dirty allow to settle longer or drop the level further with bottom chamber tap.

Once wax is clean drain clean wax straight into a pouring jug or moulds until the clean wax is exhausted.

Repeat the process until all capping’s and old foundation have been used.

If there is a build-up of pollen or debris in the bottom of the chamber it is time to clean the unit out.

It is not recommended to clean brood comb in the unit as brood comb generally contains a lot of debris – specifically cacoons which can clog the tap.

De Candy Warming Honey

It is important to set the desired temperature and allow the unit to heat up to the set temperature you require before placing honey in the chamber and warming the honey. For larger models (25-35L) 10L and 20L buckets of candied honey can be gently lowered into the unit. Set the temperature to 60℃ and run for 24 hours. After which the honey will be completely liquefied within the bucket. Lower temperatures will take longer. Note: honey heated above 40c is not considered to be raw.

Double Boiling Method explained

An electric double boiler means the unit has a water jacket around the outside of the product chamber providing a much larger heating surface, the water jacket protects the product from high heat that is produced by the electric element when it’s heating, the water jacket thermostat controls the heating process, once heated up product is placed into the product chamber and the heated water in the jacket melts/heats/emulsifies/separates depending on the product being used from the base and the sides to the desired temperature.

The product tap passes through the water jacket and is surrounded by hot water heating it.

Product is stirred periodically to stabilise temperature before pouring.

Product temperature is maintained by the water jacket thermostat allowing the user to spend time preparing for the final product.

If you would like more information or have any questions feel free to email or call Rob directly on Tel: 0409 165 003 (Telephone during business hours please)

Shipping Quotes and Checkout 

Shipping Quote:

  1. Add the item to the Cart to obtain a shipping quote, in the Cart enter your state & postcode in the shipping calculator, click update, the shipping cost will calculate to your postcode. Note: AU Wax Melters are large items.

Checkout:

  1. Proceed to the checkout and provide full shipping details and select payment option.

Empty Cart:

  1. If you don’t wish to proceed, simply delete the item in the basket by clicking on the X next to the item.

Terms and conditions acceptance on checkout relate to usage, warranty etc, see about us tab for full details.

Shipping , availability and dispatch:  

In most cases order to dispatched is 2 business day’s plus transit time to your location, transit time is depending on customer location from our location (Pakenham Victoria 3810 Australia).

In some high demand periods order to dispatch can blow out slightly, please take this into consideration when timing your purchase, ordering with a just in time expectation allows no time should a unforeseen problem arise etc.

Orders are shipped signature on delivery with Australia Post.  img_logo_small_austpost

AU Wax Melters is a direct to public manufacturer.

 

You may also like…